AGAT 8-1.60

AGAT 8 ® SINGLE PHASE PREPAYMENT METER

Using the economical AGAT 8 meter family design as the base metering device, MZEP has incorporated the important AMR system connectivity without unnecessary extra costly features. This makes the AGAT 8 meter just as easy to configure and operate as your other installed meters.
The Single Phase Prepayment Energy Meter acquires STS (Standard Transfer Specification) certificate which can accept STS code entry. The meter can perform multi-rate TOU (Time Of Use) metering of active, reactive and apparent energy and can contain different communication modules. It can be configured on the AMR system by adding an appropriate hub, and also switch between pre-payment/ post-payment (bill revenue collection mode) based on actual usage. The meter can also be used to as “split” meter, consisting of two components: the MCU (Measurement Control Unit) and CIU (User Interface Unit). The MCU is installed outside the customer’s premises in a meter housing, while the CIU is located inside the customer’s premises.
MZEP is bridging the gap between standalone revenue metering and AMR system connected point metering.

Категория:

Технические характеристики

Accuracy

Active energy: 1.0 % (IEC 62053-21)
Reactive energy: 2.0 % (IEC 62053-23)
Maximum current

Continuous at 100A
Current range

0 A to 80 A
Starting current

0.004Ib mA
Maximum voltage

Continuous at 190 % Un VAC
Voltage range

Nominal: 230 V
Frequency

Nominal 50 Hz
Temperature range

-25 °C to +75 °C Operating
-40 °C to +85 °C Storage
Humidity range

0 % to 95 % noncondensing
Power supply burden

Less than 2 W, 8VA
Internal clock accuracy

Better than 0.5 seconds/day
Communications

Optical port 300 bps to 9600 bps
Serial ports 1200 bps to 9600 bps

Описание

The AGAT 8 meter is a highly accurate, robust, system-ready meter. All the important metering features are included at an economical price – without the expensive bells and whistles.

Advanced features and functions
• Multi-rate measurement of active, reactive and apparent demand
• Class 1 Accuracy class metering
• Power quality measurement
• Integrated tariff clock
• Time back-up with internal battery
• Optical port acc. IEC 62056-21
• Readout of meter data according to VDEW specification by use of IEC 62056-21
• Conforms to IEC 62052-11 & IEC 62053-21 metering standards
• Use of OBIS identifier system (IEC 62056-61)
• Terminal BS version
• Data logging and event recording
• Circuit diagnostics
• Integrated connect/ disconnect relay power supply
• Load profile for billing data
• Anti-Tampering features, like
— main and terminal cover removal
— magnetic field detection
— reverse run detection
— always run positive measurement
• Ingression protection IP54 (IEC 60529)
• Local firmware upgrade adopts Y-Modem protocol

AMR system connectivity
• RS485 serial comm. port
• GSM/GPRS modem
• Serial connection SCSSCAAA9 port1
• DLMS/COSEM protocol

Похожие товары